Stemco
STEMCO makes wheel end and suspension parts for heavy-duty trucks, trailers and buses. At Restauco this page brings together STEMCO parts for the wheel end and the steering axle.
On this page you will find STEMCO Guardian HP wheel seals, STEMCO Voyager and other oil seals, hub caps, with and without pipe plug, STEMCO Plus Kit and Qwik Kit king pin kits, taper lock pins and related hardware. Many listings name the axle type or rating they are designed for, so read them carefully.
From the shop: on heavy-duty wheel ends, a leaking seal or a cracked hub cap lets oil out and dirt in, and a dry wheel end can fail quickly. Check oil level and look for leaks at every service. When you replace a seal, clean the hub and spindle, inspect the wear surface and install the seal straight with the correct tool. Adjust the wheel bearings exactly as the manufacturer's procedure says. King pin installation depends on the kit and the application: some kits need the bushings reamed, while no-ream kits use pre-sized bushings, so follow the instructions that come with your kit.
Wheel end parts depend on axle make, model and rating. Match the STEMCO number on your old part, or send us your axle details and VIN and we will help you check it.
HUB TOOL
QWIK KIT KING PIN KIT
PRO-TORQ SPINDLE NUT
GUARDIAN HP SEAL
No results found. Here are some helpful search tips:
- Search by a part name. Example: water pump.
- Be less specific. Example: brake instead of ceramic brake.
- Remove information such as make, year or model.
- Can't find the part you are looking for? Contact us and we'll find it for you!