SUSPENSIA

Suspensia makes chassis parts for cars, trucks and SUVs. At Restauco this page brings together Suspensia steering and suspension parts, with the position listed in each title.

On this page you will find Suspensia lateral arms, suspension control arm and ball joint assemblies, ball joints, stabilizer bar links, and inner and outer steering tie rod ends. Many of these parts are for the rear suspension of modern cars, which often uses several arms on each side.

From the shop: a clunk over bumps, a loose steering wheel or uneven tire wear usually means something in the suspension is worn. Inspect every arm, joint and bushing before you order, because they often wear out together. Rear lateral arms on multi-link suspensions are easy to mix up, so compare the new part to the old one before installing it: front or rear, upper or lower, left or right, forward or rearward. Tighten bushing bolts with the vehicle at ride height so the rubber is not twisted. When you replace an inner tie rod, replace the rack boot too, and when you replace any tie rod or arm, get an alignment.

Confirm your part by year, make, model, drive type and position, or send us your VIN and we will help you check it.