Rancho Suspensions

Rancho makes shocks, struts and steering stabilizers for trucks, Jeeps and SUVs. At Restauco this page brings together Rancho ride control parts for street, towing and off-road use.

On this page you will find Rancho RS5000X shock absorbers, Rancho RS7MT monotube shock absorbers, Rancho RS5000X loaded strut and coil spring assemblies, which come ready to install, Rancho RS5000 steering dampers, Rancho steering damper kits designed to reduce shimmy from larger tires, and Rancho suspension lift kits.

From the shop: match the shock to the vehicle and the way it is used. A lifted truck needs shocks for its lift height; a stock-height shock on a lifted truck can top out or bottom out. Measure the extended and compressed length if the suspension has been modified. Replace shocks in pairs on the same axle. A steering damper helps control shimmy, but it does not fix worn parts: if the steering shakes after a bump, inspect the track bar, tie rods, ball joints and wheel bearings first. On loaded struts, check front or rear and left or right, and get an alignment after the job.

Ride control parts depend on drive type, lift height and position. Confirm your part by year, make, model, drive type and lift, or send us your VIN and we will help you check it.