Moog

MOOG makes steering and suspension parts for cars, trucks and SUVs. At Restauco this page brings together the MOOG chassis parts technicians use to fix noise, wander and uneven tire wear.

On this page you will find MOOG suspension control arms and control arm and ball joint assemblies, ball joints, outer tie rod ends, sway bar links, stabilizer bar bushing kits, leaf spring bushings, track bar bushings, rear alignment toe adjusters and CV axle assemblies. Read each listing for the front or rear, upper or lower, and left or right position.

From the shop: a clunk over bumps, a loose steering wheel or uneven tire wear usually means something in the front end is worn. Check the whole front end before you order, because ball joints, bushings and tie rods often wear out together. Any time you replace a tie rod end, control arm or toe adjuster, get an alignment. Torque suspension bolts with the vehicle at ride height so the bushings are not twisted. On CV axles, a clicking noise in turns usually points to the outer joint, and a torn boot should be fixed before the joint fails.

Many chassis parts are side- and position-specific. Confirm your part by year, make, model, drive type and position, or send us your VIN and we will help you check it.